Aging properties of styrene-butadiene rubber nanocomposites filled with carbon black and rectorite

To better understand the effect of rectorite and carbon black (CB) on the aging performance of styrene-butadiene rubber (SBR), SBR/CB, SBR/CB/rectorite and SBR/rectorite nanocomposites with the same total filler loading were prepared. The microstructure of the three SBR nanocomposites was characterized by XRD, TEM and SEM. After thermal aging, oxygen-containing molecules were found to be formed in the SBR nanocomposites, as verified by FTIR analysis. The SBR/rectorite nanocomposite showed the highest aging coefficient and the lowest change rate of tensile strength and stress at 100% strain among the three SBR nanocomposites, indicating that the introduction of nano-dispersed rectorite layers can enhance the thermal aging resistance of the nanocomposites. For the SBR/CB/rectorite nanocomposite, the addition of CB helped to improve the interfacial compatibility between the filler and matrix, resulting in the best crack resistance as the aged SBR/CB/rectorite nanocomposite always demonstrated the least cracks on the surface during either stretching or bending experiments.     

Electroactive shape memory cyanate/polybutadiene epoxy composites filled with carbon black

Electroactive shape memory composites were synthesized using polybutadiene epoxy(PBEP) and bisphenol A type cyanate ester(BACE) filled with different contents of carbon black(CB). Dynamic mechanical analysis(DMA), scanning electron microscopy(SEM), electrical performance and electroactive shape memory behavior were systematically investigated. It is found that the volume resistivity decreased due to excellent electrical conductivity of CB, in turn resulting in good electroactive shape memory properties. The content of CB and applied voltage had significant influence on electroactive shape memory effect of developed BACE/PBEP/CB composites. Shape recovery can be observed within a few seconds with the CB content of 5 wt% and voltage of 60 V. Shape recovery time decreased with increasing content of CB and voltage. The infrared thermometer revealed that the temperature rises above the glass transition temperature faster with the increase of voltage and the decrease of resistance.     

Ultrafast Preparation of Black Phosphorus Quantum Dots for Efficient Humidity Sensing

Black phosphorus quantum dots (BPQDs) have been prepared by a high turbulent shear rate generated from a household kitchen blender. A layer‐by‐layer disintegration mechanism of bulk BP crystals is suggested. As‐synthesized BPQDs have shown excellent humidity sensing and photothermal converting properties. Importantly, this work not only explores potential applications for the BPQDs but also provides a successful paradigm for preparing the QDs of other layered materials.     

Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties

Isotactic polypropylene (i‐PP) can crystallize in different crystal modifications. In this article, the effect of sepiolite (one‐dimensional) and carbon black (three‐dimensional) fillers on the solid‐state drawability of i‐PP is discussed. The cross‐hatched structure of thermodynamically most stable α‐crystal phase in i‐PP does not allow for perfect chain alignment during solid‐state drawing. The β‐phase i‐PP, obtained by addition of specific nucleating agents, crystallizes in a non‐cross‐hatched spherulitic structure and allows more easy drawing. Depending on the filler type, β–α transformation takes place at different draw ratios, as was observed by in situ wide‐angle X‐ray diffraction measurements. It was observed that β‐nucleated i‐PP has a lower yield stress and can be drawn further than i‐PP crystallized in the α‐crystal phase. If added in the right amount, both carbon black and sepiolite have a reinforcing effect on PP tapes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1071–1082     

Characterizing the influence of reinforcing resin on the structure and the mechanical response of filled isoprene rubber

In the present study, a specific type of reinforcing resin behavior is investigated using various mechanical approaches as well as microscopic techniques such as transmission electron microscopy and atomic force microscopy. Based on these observations, it could be concluded that the reinforcing resin introduces a synergistic effect with carbon black in order to strengthen the system. This is implied since the percolation threshold is significantly reduced and the morphology of the filler aggregates changes toward higher compactness, i.e., an increase of volume-to-size ratio with the addition of resin.     

Projective Reed–Muller type codes on rational normal scrolls

In this paper we study an instance of projective Reed–Muller type codes, i.e., codes obtained by the evaluation of homogeneous polynomials of a fixed degree in the points of a projective variety. In our case the variety is an important example of a determinantal variety, namely the projective surface known as rational normal scroll, defined over a finite field, which is the basic underlining algebraic structure of this work. We determine the dimension and a lower bound for the minimum distance of the codes, and in many cases we also find the exact value of the minimum distance. To obtain the results we use some methods from Gröbner bases theory.     

Biodegradable Black-Phosphorus-Nanosheet-Based Nanoagent for Enhanced Chemo-Photothermal Therapy

Black phosphorus nanosheet (BPNS) is a promising multifunctional material in the biomedical field with biodegradability and low side effects, however its features are always weakened severely owing to its poor stability. Here, a novel method is developed for improving the defect of BPNS based on the effective protection of poly(lactic-co-glycolic acid) (PLGA), which preserves the stable photothermal therapy (PTT) effect of BPNS and biodegradability of the material. Meanwhile, doxorubicin (DOX) is loaded on BPNS/PLGA to get BPNS/PLGA/DOX for further chemotherapy and preventing the recurrence of tumor after PTT. The presented combined therapeutic strategy exploits the strengths and improves the defects of BPNS, thus developing an efficient and safe nanoagent for cancer therapy, which affords and reveals the great potential of BPNS in nanomedicine.     

Thermodynamics and Phase Transition of Topological Dilatonic Lifshitz-Like Black Holes

It is known that scalar-tensor gravity models can be studied in Einstein and Jordan frames. In this paper, a model of scalar-tensor gravity in Einstein's frame is considered to calculate the Lifshitz-like black hole solutions with different horizon topologies. Thermodynamic properties and first order van der Waals-like phase transition are studied, and it is found that the Lifshitz parameter affects the phase structure. In addition, thermal stability is investigated by using the behavior of heat capacity and various methods of geometrical thermodynamics.     

面内双轴应力作用下单层黑磷能带性质研究

通过第一性原理对平面内双轴应力作用下的单层黑磷能带结构进行了计算.双轴拉伸应力作用下单层黑磷始终保持直接带隙性质,双轴压缩应力作用下的单层黑磷则发生了直接带隙转变为间接带隙的现象,当双轴压缩应力增加到7%时单层黑磷带隙闭合.